• The maximum working temperature – 100°C
• The maximum working pressure 1.0 MPa (max. 3.0 MPa on special orders)
• side supplied with 2 connecting nozzles G1/2″ (ISO-228)

“Convector Premium V” – water radiators (with bottom water supplied)

• The maximum working temperature – 100°C
• The maximum working pressure 1.0 MPa
• bottom supplied with 2 connecting nozzles 3/4″B (ISO-228)
• built-in thermostat valve  HERZ-TS-98-V

• height 20, 35, 50 cm
• width – 10 cm
• length – from 50 to 290 cm
• normal thermal power
  322 [W] – 3405 [W]
  acc. to EN-442 75/65/20°C

• height 50, 65, 80 cm
• width – 10 cm
• length – from 50 to 290 cm
• normal thermal power
  635 [W] – 5250 [W]
  acc. to EN-442 75/65/20°C

• height 12, 16, 20 cm
• width – 16 cm
• length – from 100 to 295 cm
• normal thermal power
  822 [W] – 3023 [W]
  acc. to EN-442 75/65/20°C

• height 20, 30, 40 cm
• width – 20 cm
• length – from 100 to 295 cm
• normal thermal power
  1428 [W] – 6015 [W]
  acc. to EN-442 75/65/20°C

• height 20, 35, 50 cm
• width – 10 cm
• length – from 50 to 290 cm
• normal thermal power
  266 [W] – 3336 [W]
  acc. to EN-442 75/65/20°C

• height 50, 65, 80 cm
• width – 10 cm
• length – from 50 to 290 cm
• normal thermal power
  525 [W] – 5143 [W]
  acc. to EN-442 75/65/20°C

• height 12, 16, 20 cm
• width – 16 cm
• length – from 100 to 295 cm
• normal thermal power
  762 [W] – 2961 [W]
  acc. to EN-442 75/65/20°C

• height 20, 30, 40 cm
• width – 20 cm
• length – from 100 to 295 cm
• normal thermal power
  1325 [W] – 5892 [W]
  acc. to EN-442 75/65/20°C

Radiators PREMIUM produced to order: delivery time – max. 14 days.

The Premium radiator consists of the heat exchanger made of copper coil pipe (pipe diameter 22 mm) with ribs of aluminium sheet plate and connection pipes, all placed in the aluminium sheet plate casing. These materials are resistant to corrosion and also conduct heat perfectly. The large heating area of these radiators allows obtaining high powers at low touch temperature of the radiator itself.

The coil pipe of water radiators is made of copper, while elements of ribs making up the case are made of aluminium. Only the coil pipe is in contact with the installation water in Convector radiators. This structure ensures perfect compliance of materials with the installation made of copper pipes and ensures complete resistance to corrosion.

External surfaces of radiators are made of aluminium and are covered with polyester-epoxy enamels in the powder technology. This ensures durability of the radiator working even in rooms of increased humidity, e.g. in swimming pool halls, bath facilities, laundries, etc.

Bottom-fed radiators (PREMIUM V) are fitted with the HERZ-TS-98-V thermostatic valve with the maximum water flow as the default setting. Thermostatic heads with M28x1,5 may be connected to this valve.

All the radiators are fitted with an air vent.

The outlet grate, with its properly shaped elements, performs the function of a drive for the heated air leaving the radiator. The structure of the outlet grate allows placing it so that the outlet air is directed to the centre of the room.

Report on the ITGS Radom research No. 104, 105, 107 (as amended), 111
The National Institute of Hygiene Certificate HK/B/1101/01/2000
The maximum working pressure 1.0 MPa (“PREMIUM B” 3.0 MPa on special orders)
The maximum working temperature 100°C